TH-230.01 (BiI112L/15000i) HSK-A63/BBT-40 15,000rpm

Model
Product Information
Type TH-230.01
FANUC
BUILT-IN SPINDLE MOTOR
BiI 112L/15000i
Spindle Ø 230mm
Maximum Speed (Oil-Air) 15,000rpm
Bore diameter of front bearings 70mm
Rigidity Axial
(N/µm)
Standardised or According to customer needs.

It is available to increase the static rigidity,
but the maximum speed will be reduced.
Radial
(N/µm)
Low winding S1 kW 15kW
ab Drehzahl:1,500~3,500rpm
S1 Torque (Nm) 95Nm
ab Drehzahl:~1,500rpm
S2/S3 kW 18.5kW(S3-15%)
ab Drehzahl:1,060~3,500rpm
S2/S3 Torque
(Nm)
167Nm(S3-15%)
ab Drehzahl:~1,060rpm
High winding S1 kW 18.5kW
ab Drehzahl:5,000~15,000rpm
S1 Torque (Nm) 35Nm
ab Drehzahl:~5,000rpm
S2/S3 kW 22kW(S2-15min)
ab Drehzahl:5,000~15,000rpm
S2/S3 Torque
(Nm)
42Nm(S2-15min)
ab Drehzahl:~5,000rpm
Tool Interface HSK-A63
BBT-40
Spindle Cooling Cooling capacity:6,000Kcal/hr (at25℃)
Water cooling /Oil cooling
Spindle Weight 210kg
Integral Encoder
For Closed-Loop Control
Standard
Coolant Through Shaft (CTS) Option
Tool Position Sensors Proximity switches /
Analog sensor
Front Bearing
Temperature Sensor
Standard

Also available with Oil cooling. This cooling leads to motor power reduction.
Also available with grease lubrication. This lubrication leads to speed reduction.

Low winding kW
Low winding Nm
High winding kW
High winding Nm
Compare Others Specifications
Type TH-190.01 TH-230.01 TH-230.04 TH-230.08 TH-230.13
FANUC
BUILT-IN SPINDLE MOTOR
BiI 112S/20000i BiI 112L/15000i BiI 112L/15000i BiI 112L/20000i BiI 112L/20000i
Spindle Ø 190mm 230mm 230mm 230mm 230mm
Maximum Speed (Oil-Air)
Also available with grease lubrication.
This lubrication leads to speed reduction.
20,000rpm 15,000rpm 10,000rpm 20,000rpm 12,000rpm
Bore diameter of front bearings 70mm 70mm 100mm 70mm 70mm
Rigidity Axial
(N/µm)
180N/µm Standardised or According to customer needs.

It is available to increase the static rigidity,
but the maximum speed will be reduced.
Radial
(N/µm)
200N/µm
Low winding S1 kW 7kW 15kW 15kW 15kW 15kW
S1 Torque (Nm) 31Nm 95Nm 95Nm 80Nm 80Nm
S2/S3 kW 11KW(S3-15%) 18.5kW(S3-15%) 18.5kW(S3-15%) 18.5kW(S3-25%) 18.5kW(S3-25%)
S2/S3 Torque
(Nm)
60Nm(S3-15%) 167Nm(S3-15%) 167Nm(S3-15%) 118Nm(S3-25%) 118Nm(S3-25%)
High winding S1 kW 11kW 18.5kW 18.5kW 18.5kW 18.5kW
S1 Torque (Nm) 18Nm 35Nm 35Nm 22Nm 22Nm
S2/S3 kW 18.5kW(S2-10min) 22kW(S2-15min) 22kW(S2-15min) 22kW(S2-15min) 22kW(S2-15min)
S2/S3 Torque
(Nm)
29Nm(S2-10min) 42Nm(S2-15min) 42Nm(S2-15min) 42Nm(S2-15min) 42Nm(S2-15min)
Tool Interface HSK-A63
BBT-40
HSK-A63
BBT-40
HSK-A100
BBT-50
HSK-A63
BBT-40
HSK-A63
BBT-40
Spindle Cooling Water cooling
Also available with Oil cooling. This cooling leads to motor power reduction.
Spindle Weight 87kg 210kg 230kg 180kg 230kg
Integral Encoder
For Closed-Loop Control
Option Standard Standard Standard Standard
Coolant Through Shaft (CTS) Option Option Option Option Option
Tool Position Sensors Proximity switches / Analog sensor
Front Bearing
Temperature Sensor
Standard Standard Standard Standard Standard